Following up on yesterday’s post, here are the instructions to install HouseAgent on Linux. I took one of the most popular Linux distribution’s (Ubuntu) for this blog post, but it should be easy to apply this guide for other distributions as well. Step 1: installing HouseAgent prerequisites The first step is to install the HouseAgent [...]
Posts Tagged ‘linux’
Introducing HouseAgent
June 14th, 2011
6 Comments
HouseAgent is a multi platform, open source home automation application. That was the short introduction of something I have been working on for quite some months already. HouseAgent has been running as my own home automation software for some time. I hear you asking, why not use one of the standard software products available? There [...]
XML-RPC package
February 24th, 2010
No Comments
Alot of people were e-mailing/asking me about this package. It has been added for download, here: http://www.maartendamen.com/?page_id=14&did=3
Plugwise protocol unleashed part 3: internal clock information
February 6th, 2010
17 Comments
Introduction In the Plugwise protocol unleashed series, I will describe the plugwise protocol. As far as I have been able to re-engineer it. I did this re-engineering work because there is no Linux/OSX software available to control your plugwise devices. All information in these series are based on the 2.0 firmware version! DISCLAIMER: use of [...]
Plugwise protocol unleashed part 2: device information
February 1st, 2010
9 Comments
Introduction In the Plugwise protocol unleashed series, I will describe the plugwise protocol. As far as I have been able to re-engineer it. I did this re-engineering work because there is no Linux/OSX software available to control your plugwise devices. All information in these series are based on the 2.0 firmware version! DISCLAIMER: use of [...]
Plugwise protocol unleashed part 1: introduction
January 24th, 2010
10 Comments
Introduction In the Plugwise protocol unleashed series, I will describe the plugwise protocol. As far as I have been able to re-engineer it. I did this re-engineering work because there is no Linux/OSX software available to control your plugwise devices. All information in these series are based on the 2.0 firmware version! DISCLAIMER: use of [...]
Plugwise on Linux downloads back online
November 5th, 2009
14 Comments
Because of the huge amount of requests I get for this piece of software I’ve put POL (Plugwise on Linux) back online. You can find it in the “Downloads” section.
